Risoul DivisionsAt Risoul we have more than 60 product specialists ready to help you.
We want to get to know your project. Leave your contact information and a member of our technical support team will contact you.
We want to get to know your project. Leave your contact information and a member of our technical support team will contact you.
We have been a proud Panduit distributor for more than 14 years, a brand recognized internationally for high quality products and solutions. We have more than 22 sales locations in Mexico and a main office in Monterrey, Nuevo Leon.
Lowest cost connector option can be used in space constrained applications.
Standard Barrel:
- Code: LCA* Series
- Flex: LCAX* Series
- Flex Flared: LCAF* Series
- Metric: LCMA* Series
- Aluminum: LAA* Series
Long Barrel:
- Code: LCB* Series
- Flex: LCBX* Series
- Metric: LCMB* Series
Facilitate joining of wires to provide a continuous length of conductor.
Standard Barrel:
- Code: SCS* Series
- Flex: SCSF* Series
- Metric: SCMS* Series
Short Barrel: SCSS* Series
- Long Barrel: SCL* Series
- Aluminum: SA* Series
Two stud holes provides anti-rotation feature and maximizes electrical conductivity.
Standard Barrel:
Code: LCD* Series
Flex: LCDX* Series
Metric: LCMD* Series
Aluminum: LAB* Series
Long Barrel:
Code: LCC* Series
Flex: LCCX* Series
Flex Flared: LCCF* Series
Metric: LCMC* Series
Wide range-taking capability minimizes inventory requirements.
- Copper: SBC* Series
- Tin-plated: SBCT* Series
- Aluminum: SBA* Series
Flexible design can be used as a tap, splice, or dead end connector, eliminates need for insulating tape or heat shrink.
Dual Sided: PCSB* Series
Single Sided: PCSB-S* Series
In-line Splicer Reducer: PISR* Series
With mounting holes:
- Dual Sided: PCSBMT* Series
- Single Sided: PCSBMT*S Series
Dual rated for use with aluminum or copper wire, range taking, reusable, install with common tools.
- Single barrel lugs: LAMA*, LAMB* Series
- Two barrel lugs: LAM2* Series
- Three barrel lugs: LAM3* Series
- Four barrel lugs: LAM4* Series
- Splicer/reducer: SR* Series
Install with common tools, range taking and reusable.
One-hole Lugs:
- Barrel-post: ML*-* Y Series
- Straight Tongue: PNL* Series
- Internal Pressure Plate: HL* Series
Two-hole Lugs:
- Straight Tongue: PNL-2* Series
- Two Barrel: H2L*-2N* Series
Splices:
- Two-set Screw: PNLC* Series
- Internal Pressure Plate: HC* Series
One-hole Lugs:
- Straight Fixed Tongue: CX*, CXS* Series
- Straight Floating Tongue: CS* Series
- Offset Floating Tongue: CB* Series
Two-hole Lugs:
- Straight floating tongue: CD* series
- Offset floating tongue: CO* series
For connecting: conductor to conductor, conductor to rebar, and conductor to ground rod applications.
- GCE* series
Allows bonds through concrete.
- GPC4H250-2
Bonds structural steel to grounding conductor system: provides a mounting pad suitable for a two-hole compression lug.
- GUBC500-6
For connecting: conductor to conductor, conductor to rebar, and conductor ground rod applications.
GCC* Series
For grounding copper code conductor to water pipe or iron pipe (IPS)
- GPC* Series
Direct Burial Rated with Phos bronze hardware: GPC*-*D Series
- Ground Hub: GHC* Series
Dual-rated for grounding aluminum or copper code conductors to copper water pipe, galvanized pipe, or steel conduit
GC* Series
For grounding copper code conductors to steel structures, busbars, or transformers, direct burial rated.
Male stud:
- One Conductor: SP1* Series
- Two Conductor: SP2* Series
Female thread:
- One Conductor: SPF1* Series
- Two Conductor: SPF2* Series
Series.jpg)
For grounding copper conductor parallel to ground rods, direct burial rated.
- Standard Duty: GRC* Series
- Heavy Duty: GRCH* Series
For grounding copper code conductor to flat surfaces, direct burial rated.
GM* Series
- incorporates spacer plate to separate conductor from mounting surface.
GMS* Series
- used to ground two copper code conductors to flat surfaces.
For quick installation of a continuous grounding conductor.
Tin Plated Aluminum:
- LIAS* y LIAC* Series
Direct Burial Rated:
- LICC4* Series (copper body)
For grounding copper code conductors to cable trays
- GTC* Series
For grounding copper code conductors parallel to a rod, tube, or pipe, direct burial rated.
- One Conductor: GPL* Series
- Two Conductor: GU* Series
- Three Conductor: GPC3250-38-X
- Two Conductor (perpendicular to rod, tube or pipe): GPC2* Series
Delivers strength, long life and resistance to chemicals, vibration, radiation, weathering, and extreme temperatures.
MLT* Series
- Variety of sizes available in both AISI 304 and 316 stainless steel
Ideal in harsh and industrial environments, delivers long-term durability and legibility for optimum identification of pipes, conduit, cables and equipment. Use with MLT Series ties for fast installation at lowest installed cost.
MMP* Series
MT* Series
Use in the installation of Mineral Insulated Electric Heat Trace (MIEHT)
HTMLT* Series
Superior corrosion resistance providing maximum performance, longer service life and improved reliability
MLTFC* Series
- Variety of sizes and colors available in AISI 316 stainless steel
Ultimate solution for mechanical fastening applications. The buckle design and installation tools offer a quick and safe installation
MS* Series (uncoated)
- Variety of sizes available in both AISI 304 and 316 stainless steel
MSC* 316 Series
- AISI 316 stainless steel for the most corrosive environments
- UV resistant, low smoke, halogen-free coating material
MSB* Series
- Individual low profile buckles
Up to 156kA rated option
Double Loop – MLT*D Series
- Extra-heavy and super-heavy cross-sections
- Protection up to 70kA peak current
Strapping – MS*75* Series
- Single and Double Loop capability in a single part #
- AISI 316 stainless steel
- Protection up to 156kA peak current
Metal Uniclip Brackets – UC* Series
- Allows ties and straps to be installed on any style or design cable tray
Cushion sleeve – PCSSH* o PCSS* Series
- The use of cushion sleeve required in most applications
Provide excellent performance at continuous operating temperatures of up to 500°F (260°C), best in class strength, in addition to chemical and radiation resistance.
- PLT**-*71 Series
Low smoke density and excellent flammability rating of UL 94V-0. Distinct aqua blue color. Ideal for applications requiring resistance to gamma radiation and chemical attack.
- PLT**-*76 Series
- Tefzel is a registered trademark of E.I. du Pont de Nemours and Company
Provide superior chemical resistance to acids, bases, and salts making them ideal for chemical plants.
- PLT**-*109 Series
STAINLESS STEEL:
- 316 Stainless Steel: MLT***-**316 Series
- Polyester Coated Stainless Steel: MLTFC**-**316
- Nylon 11 Selectively Coated: MLTC**-**316
- Aluminum: MLT**-LPAL
A material with 12-15 years of weathering life expectancy and resistance to zinc chlorides and dilute acids. Ideal for wire management on galvanized steel cable trays.
- PLT***-120 Series
- Weather resistant Nylon 6.6 also available: PLT*-*0 Series
Stainless steel lock barb provides consistent performance, reliability, and infinite adjustability through entire bundle range applications.
BT**-*0 Series
- Heat Stabilized option available up to 239°F (115°C): BT**-*30 Series
Release tab permits easy release and reuse where changes are anticipated
- PRT** Series
Identifiable maroon colored parts UL listed for use in plenum or air handling spaces per NEC, Section 300-22 (C) and (D) UL62275 AH2 rating
- PLT**-*702Y Series
- HALAR is a registered trademark of Ausimont USA, Inc.
Unique metal impregnated material allows identification by metal detectors or x-ray inspection to meet food and beverage industry FDA requirements by helping to reduce product contamination.
- PLT**-*86 Series
- Also available in polypropylene: PLT**-*186 Series
Ties are UL94V-0 rated for applications requiring resistance to flame propagation.
- PLT**-*69 Series
Slotted nylon performs up to 149°F (65°C) operation temperature and slotted polyethylene performs up to 122°F (50°C).
- Nylon: GEE*N-* Series
- Polyethylene: GEE**F-* Series
- Adhesive Lined Polyethylene: GE**F-A-* Series
Provides weather resistant abrasion protection to hoses/cables while harnessing multiple hoses/cables into a single manageable bundle
- Polyethylene: T**F-*0 Series
- Nylon 6.6: T**N-*0 Series
- Polypropylene: T**P-*0 Series
Para aplicaciones contráctiles en seco, con temperaturas de operación de hasta 260oC (482oF)
- HSTTT* Series
Dry shrink applications up to 347°F (175°C)
- HSTTK* Series
Adhesive lined inner wall seals and provides excellent protection against moisture.
- HSEC** Series
UL listed for direct burial and recognized for sunlight resistance and VW-1 flammability with an operating temp of 230°F (110°C).
- HST* Series Black
Patented slot pattern provides improved flexibility and cable abrasion protection with reduced installation time
- PW*F*-* Series
Highly flexible, does not trap heat or humidity and the slit allows easy install and access for further upgrades or repairs
- SE*PS-*RO Series
Provides protection for cables. Slit for easier install onto a bundle of wires or a pre-assembled harness assembly.
- CLT**F Series
Provide maximum adhesion even in high-temperature and outdoor environments.
- ABM* Series
Provide standards-compliant method for routing communication cables throughout the plant infrastructure.
- JP** Series
Ideal for applications requiring resistance to gamma radiation and chemical attack.
- TM**-*76 Series
Operating temperature range up to 500°F (260°C); maintains good tensile strength in high temperature environments. Available in a broad selection of materials, sizes and styles
- TM**-*71 Series
- TM*S*-** Series
Unique metal impregnated material allows identification by metal detectors or x-ray inspection to meet food, beverage, and pharmaceutical safety standards by helping to reduce product contamination.
- TM**-*86 Series
Ring tongue design assures a secure connection in high vibration applications.
- Nylon: PN*-*R Series
- Heavy Duty: PN12-**HDR-* Series
- Vinyl: PV*-R* Series
- Heavy Duty: PV12-*HDR-* Series
- Heat Shrink: PH**-**R* Series
- Kynar Insulated: PK*-R* Series
- Non-Insulated: P**-R* Series
- Heavy Duty: P12-*HDR-L Series
- High Temp: P**-RHT*-* Series
Fork design provides for fast and easy installation, without the need to remove fastener.
- Nylon: PN*-F*
- Vinyl: PV*-F*
- Non-Insulated: P*-F* Series
Designed and precision made to function as a reliable method of making quick, repeatable interconnections.
- Nylon: DN* Series
- Vinyl: DV* Series
- Heat Shrink: DNH* Series
- Non-Insulated: D** Series
Solid pin designed to prevent damage to the wire from over tightening, resulting in a reliable electrical connection.
- Vinyl: PV*-P* Series
- Non-Insulated: P*-P* Series
Designed with a seamless barrel to contain loose wire strands for superior termination.
- Non-Insulated 24 AWG-500kcmil: F** Series
- Polypropylene Covered Insulated 26 AWG-300kcmil: FSD* Series
- Twin Polypropylene Covered 22 AWG-6 AWG: FTD* Series
Designed and manufactured for fast assembly, and long reliable performance
Nylon:
- Butt Splice: BSN* Series
- Parallel Splice: PSN* Series
- Wire Joint: JN* Series
Vinyl:
- Butt splice: BSV* Series
Heat Shrink:
- Butt splice: BSH* Series
Non-Insulated:
- Butt Splice: BSM* Series
- Parallel Splice: PS* Series
- Wire Joint: J*** Series
Steel kits have individual compartments for storage of terminals, disconnects and splices
- Nylon: K1-PNKIT
- Vinyl: K2-PVKITY
- Ferrules 100 Piece Kit: KP-FSD3
- Terminal Kit: KP-1075Y
Lowest cost connector option can be used in space constrained applications.
Standard Barrel:
- Code: LCA* Series
- Flex: LCAX* Series
- Flex Flared: LCAF* Series
- Metric: LCMA* Series
- Aluminum: LAA* Series
Long Barrel:
- Code: LCB* Series
- Flex: LCBX* Series
- Metric: LCMB* Series
Facilitate joining of wires to provide a continuous length of conductor.
Standard Barrel:
- Code: SCS* Series
- Flex: SCSF* Series
- Metric: SCMS* Series
Short Barrel: SCSS* Series
- Long Barrel: SCL* Series
- Aluminum: SA* Series
Two stud holes provides anti-rotation feature and maximizes electrical conductivity.
Standard Barrel:
Code: LCD* Series
Flex: LCDX* Series
Metric: LCMD* Series
Aluminum: LAB* Series
Long Barrel:
Code: LCC* Series
Flex: LCCX* Series
Flex Flared: LCCF* Series
Metric: LCMC* Series
Wide range-taking capability minimizes inventory requirements.
- Copper: SBC* Series
- Tin-plated: SBCT* Series
- Aluminum: SBA* Series
Flexible design can be used as a tap, splice, or dead end connector, eliminates need for insulating tape or heat shrink.
Dual Sided: PCSB* Series
Single Sided: PCSB-S* Series
In-line Splicer Reducer: PISR* Series
With mounting holes:
- Dual Sided: PCSBMT* Series
- Single Sided: PCSBMT*S Series
Dual rated for use with aluminum or copper wire, range taking, reusable, install with common tools.
- Single barrel lugs: LAMA*, LAMB* Series
- Two barrel lugs: LAM2* Series
- Three barrel lugs: LAM3* Series
- Four barrel lugs: LAM4* Series
- Splicer/reducer: SR* Series
Install with common tools, range taking and reusable.
One-hole Lugs:
- Barrel-post: ML*-* Y Series
- Straight Tongue: PNL* Series
- Internal Pressure Plate: HL* Series
Two-hole Lugs:
- Straight Tongue: PNL-2* Series
- Two Barrel: H2L*-2N* Series
Splices:
- Two-set Screw: PNLC* Series
- Internal Pressure Plate: HC* Series
One-hole Lugs:
- Straight Fixed Tongue: CX*, CXS* Series
- Straight Floating Tongue: CS* Series
- Offset Floating Tongue: CB* Series
Two-hole Lugs:
- Straight floating tongue: CD* series
- Offset floating tongue: CO* series
For connecting: conductor to conductor, conductor to rebar, and conductor to ground rod applications.
- GCE* series
Allows bonds through concrete.
- GPC4H250-2
Bonds structural steel to grounding conductor system: provides a mounting pad suitable for a two-hole compression lug.
- GUBC500-6
For connecting: conductor to conductor, conductor to rebar, and conductor ground rod applications.
GCC* Series
For grounding copper code conductor to water pipe or iron pipe (IPS)
- GPC* Series
Direct Burial Rated with Phos bronze hardware: GPC*-*D Series
- Ground Hub: GHC* Series
Dual-rated for grounding aluminum or copper code conductors to copper water pipe, galvanized pipe, or steel conduit
GC* Series
For grounding copper code conductors to steel structures, busbars, or transformers, direct burial rated.
Male stud:
- One Conductor: SP1* Series
- Two Conductor: SP2* Series
Female thread:
- One Conductor: SPF1* Series
- Two Conductor: SPF2* Series
For grounding copper conductor parallel to ground rods, direct burial rated.
- Standard Duty: GRC* Series
- Heavy Duty: GRCH* Series
For grounding copper code conductor to flat surfaces, direct burial rated.
GM* Series
- incorporates spacer plate to separate conductor from mounting surface.
GMS* Series
- used to ground two copper code conductors to flat surfaces.
For quick installation of a continuous grounding conductor.
Tin Plated Aluminum:
- LIAS* y LIAC* Series
Direct Burial Rated:
- LICC4* Series (copper body)
For grounding copper code conductors to cable trays
- GTC* Series
For grounding copper code conductors parallel to a rod, tube, or pipe, direct burial rated.
- One Conductor: GPL* Series
- Two Conductor: GU* Series
- Three Conductor: GPC3250-38-X
- Two Conductor (perpendicular to rod, tube or pipe): GPC2* Series
Delivers strength, long life and resistance to chemicals, vibration, radiation, weathering, and extreme temperatures.
MLT* Series
- Variety of sizes available in both AISI 304 and 316 stainless steel
Ideal in harsh and industrial environments, delivers long-term durability and legibility for optimum identification of pipes, conduit, cables and equipment. Use with MLT Series ties for fast installation at lowest installed cost.
MMP* Series
MT* Series
Use in the installation of Mineral Insulated Electric Heat Trace (MIEHT)
HTMLT* Series
Superior corrosion resistance providing maximum performance, longer service life and improved reliability
MLTFC* Series
- Variety of sizes and colors available in AISI 316 stainless steel
Ultimate solution for mechanical fastening applications. The buckle design and installation tools offer a quick and safe installation
MS* Series (uncoated)
- Variety of sizes available in both AISI 304 and 316 stainless steel
MSC* 316 Series
- AISI 316 stainless steel for the most corrosive environments
- UV resistant, low smoke, halogen-free coating material
MSB* Series
- Individual low profile buckles
Up to 156kA rated option
Double Loop – MLT*D Series
- Extra-heavy and super-heavy cross-sections
- Protection up to 70kA peak current
Strapping – MS*75* Series
- Single and Double Loop capability in a single part #
- AISI 316 stainless steel
- Protection up to 156kA peak current
Metal Uniclip Brackets – UC* Series
- Allows ties and straps to be installed on any style or design cable tray
Cushion sleeve – PCSSH* o PCSS* Series
- The use of cushion sleeve required in most applications
Provide excellent performance at continuous operating temperatures of up to 500°F (260°C), best in class strength, in addition to chemical and radiation resistance.
- PLT**-*71 Series
Low smoke density and excellent flammability rating of UL 94V-0. Distinct aqua blue color. Ideal for applications requiring resistance to gamma radiation and chemical attack.
- PLT**-*76 Series
- Tefzel is a registered trademark of E.I. du Pont de Nemours and Company
Provide superior chemical resistance to acids, bases, and salts making them ideal for chemical plants.
- PLT**-*109 Series
STAINLESS STEEL:
- 316 Stainless Steel: MLT***-**316 Series
- Polyester Coated Stainless Steel: MLTFC**-**316
- Nylon 11 Selectively Coated: MLTC**-**316
- Aluminum: MLT**-LPAL
A material with 12-15 years of weathering life expectancy and resistance to zinc chlorides and dilute acids. Ideal for wire management on galvanized steel cable trays.
- PLT***-120 Series
- Weather resistant Nylon 6.6 also available: PLT*-*0 Series
Stainless steel lock barb provides consistent performance, reliability, and infinite adjustability through entire bundle range applications.
BT**-*0 Series
- Heat Stabilized option available up to 239°F (115°C): BT**-*30 Series
Release tab permits easy release and reuse where changes are anticipated
- PRT** Series
Identifiable maroon colored parts UL listed for use in plenum or air handling spaces per NEC, Section 300-22 (C) and (D) UL62275 AH2 rating
- PLT**-*702Y Series
- HALAR is a registered trademark of Ausimont USA, Inc.
Unique metal impregnated material allows identification by metal detectors or x-ray inspection to meet food and beverage industry FDA requirements by helping to reduce product contamination.
- PLT**-*86 Series
- Also available in polypropylene: PLT**-*186 Series
Ties are UL94V-0 rated for applications requiring resistance to flame propagation.
- PLT**-*69 Series
Slotted nylon performs up to 149°F (65°C) operation temperature and slotted polyethylene performs up to 122°F (50°C).
- Nylon: GEE*N-* Series
- Polyethylene: GEE**F-* Series
- Adhesive Lined Polyethylene: GE**F-A-* Series
Provides weather resistant abrasion protection to hoses/cables while harnessing multiple hoses/cables into a single manageable bundle
- Polyethylene: T**F-*0 Series
- Nylon 6.6: T**N-*0 Series
- Polypropylene: T**P-*0 Series
Para aplicaciones contráctiles en seco, con temperaturas de operación de hasta 260oC (482oF)
- HSTTT* Series
Dry shrink applications up to 347°F (175°C)
- HSTTK* Series
Adhesive lined inner wall seals and provides excellent protection against moisture.
- HSEC** Series
UL listed for direct burial and recognized for sunlight resistance and VW-1 flammability with an operating temp of 230°F (110°C).
- HST* Series Black
Patented slot pattern provides improved flexibility and cable abrasion protection with reduced installation time
- PW*F*-* Series
Highly flexible, does not trap heat or humidity and the slit allows easy install and access for further upgrades or repairs
- SE*PS-*RO Series
Provides protection for cables. Slit for easier install onto a bundle of wires or a pre-assembled harness assembly.
- CLT**F Series
Provide maximum adhesion even in high-temperature and outdoor environments.
- ABM* Series
Provide standards-compliant method for routing communication cables throughout the plant infrastructure.
- JP** Series
Ideal for applications requiring resistance to gamma radiation and chemical attack.
- TM**-*76 Series
Operating temperature range up to 500°F (260°C); maintains good tensile strength in high temperature environments. Available in a broad selection of materials, sizes and styles
- TM**-*71 Series
- TM*S*-** Series
Unique metal impregnated material allows identification by metal detectors or x-ray inspection to meet food, beverage, and pharmaceutical safety standards by helping to reduce product contamination.
- TM**-*86 Series
Ring tongue design assures a secure connection in high vibration applications.
- Nylon: PN*-*R Series
- Heavy Duty: PN12-**HDR-* Series
- Vinyl: PV*-R* Series
- Heavy Duty: PV12-*HDR-* Series
- Heat Shrink: PH**-**R* Series
- Kynar Insulated: PK*-R* Series
- Non-Insulated: P**-R* Series
- Heavy Duty: P12-*HDR-L Series
- High Temp: P**-RHT*-* Series
Fork design provides for fast and easy installation, without the need to remove fastener.
- Nylon: PN*-F*
- Vinyl: PV*-F*
- Non-Insulated: P*-F* Series
Designed and precision made to function as a reliable method of making quick, repeatable interconnections.
- Nylon: DN* Series
- Vinyl: DV* Series
- Heat Shrink: DNH* Series
- Non-Insulated: D** Series
Solid pin designed to prevent damage to the wire from over tightening, resulting in a reliable electrical connection.
- Vinyl: PV*-P* Series
- Non-Insulated: P*-P* Series
Designed with a seamless barrel to contain loose wire strands for superior termination.
- Non-Insulated 24 AWG-500kcmil: F** Series
- Polypropylene Covered Insulated 26 AWG-300kcmil: FSD* Series
- Twin Polypropylene Covered 22 AWG-6 AWG: FTD* Series
Designed and manufactured for fast assembly, and long reliable performance
Nylon:
- Butt Splice: BSN* Series
- Parallel Splice: PSN* Series
- Wire Joint: JN* Series
Vinyl:
- Butt splice: BSV* Series
Heat Shrink:
- Butt splice: BSH* Series
Non-Insulated:
- Butt Splice: BSM* Series
- Parallel Splice: PS* Series
- Wire Joint: J*** Series
Steel kits have individual compartments for storage of terminals, disconnects and splices
- Nylon: K1-PNKIT
- Vinyl: K2-PVKITY
- Ferrules 100 Piece Kit: KP-FSD3
- Terminal Kit: KP-1075Y
7 Tips to improve:
The coordination of your maintenance department
Free Download
Download our Panduit catalogue.
Free DownloadThere are many companies offering infrastructure solutions. At Risoul, we have more than 40 years of experience in the electrical market and we have had the opportunity to get to know many of these brands. Based on our experience, we are a proud Panduit distributor.
In Panduit, we have found a manufacturer with a proven reputation. Panduit is a leader in quality and technology with a wide range of partners throughout the world. Customers look to Panduit for complete solutions that unify physical infrastructure and help them meet all of their operational and financial objectives.
One of the strengths that we value most in Panduit is this company’s dedication to developing physical infrastructure solutions that satisfy customers’ changing needs from hardware and software, and consulting services.
This dedication is backed by a strong investment in research centered on developing new products, world-class manufacturing, and collaboration with partners in state-of-the-art technology
Check out our blog where you’ll find the following articles:
With over 40 years of experience in the field, our philosophy is to offer the best brands and value-added service for our customers. At Risoul, we offer automation, electrical equipment, and industrial network solutions for the following industries:
|
• Automotive • Petroleum |
• Food • Consumer |
• Mining • Manufacturing |
PDI Solutions
Immediately Available Products (PDI) is an innovative concept that enables us to deliver products from 8 of our primary lines within two business days including: panel assembly, automation, variable speed drives, machine safety, measurement, industrial cable, industrial networks, and vision, weighing and visualization.
The best product lines on the market
We represent leading brands in the industry and we work with our commercial partners to offer the best products and latest technology for our customers.
Consulting services for equipment selection and specification
In additional to the sale of electric and automation equipment, we focus on providing our customers with presale technical support, consulting and training.
Support for your project application
We have specialized engineers available to support you in the selection and specification of equipment, standardization, detection of quality improvement opportunities, improvement projects and training seminars.
Large inventory
We have over 18,000 products in stock and 2 distribution centers with the best brands on the market. At Risoul, we are ready to assist you with any project, big or small.
Delivery availability and reliability
We have a logistics staff of over 70 people and more than 40 delivery vehicles that enable us to reliably deliver materials and even make emergency deliveries 24 hours a day, 7 days a week.
DemoBus
This is an innovative mobile demo space equipped with the latest technology that enables you to take the user experience to your workplace and interact with the most up-to-date equipment.
Control and power panel assembly
Comprehensive solutions in control panel cabinets that conform to the UL-508A standard and have been approved by EATON for distribution panel assemblies.
Av. Sendero Divisorio, #400 Residencial Casa Bella, San Nicolas de Los Garza, C.P. 66428
Developed by Consultores Web