RAYCHEM PRODUCTS

TOOL FREE TERMINATION (TFT-R) 5/8 KV - 35 KV

The TFT-R elastomeric medium voltage cable termination is available for both shielded and non-shielded indoor and outdoor applications. The TFT-R termination is the latest advancement in cold-applied terminations

These terminations feature an advanced stress control system using metal oxide matrix technology that provides superior electrical performance. The TFT-R terminations feature an outer elastomeric insulation tubing formulated for long-term performance in extreme environments. The tubing comes with a pre-lubricated, crush resistant core (holdout) for simple installation.

KEY FEATURES

• TFT-R terminations are designed for 5/8, 15, 25 and 35 kV single conductor shielded and non-shielded extruded dielectric cables up to 1250 kcmil.
• Provides maintenance free, long life even in highly contaminated areas.
• Material does not degrade in outdoor applications, outstanding UV stability.
• Crush resistant core prevents collapsing due to rough handling.
• Provides easier installation in confined spaces.
• Fewer kits to accommodate a wider range of cable sizes.

HEAT SHRINK HIGH VOLTAGE TERMINATION (HVT-Z) 5/8 KV - 35 KV

Heat shrink terminations for both indoor and outdoor applications.

Raychem HVT-Z high voltage termination system features a new, co-extruded one-piece termination. The main termination component consists of the proven Raychem non-tracking tube together with a co-extruded stress control grading layer. This stress control layer is based on ceramic semi-conductor technology (ZnO) and provides superior discharge and impulse performance.

KEY FEATURES

• Co-extruded one-piece termination.
• When the tubing is shrunk down, the coating softens and sticks to irregular surfaces, providing moisture seals as well as electrical stress control.
• For highly contaminated industrial or rural areas.
• As an option, the HVT-Z can also be ordered with TE’s new line of Aluminum ShearBolt Terminals.
• These are range taking mechanical connectors that will accommodate a conductor range from #2 compact to 1000 kcmil stranded, Class B.

IN-LINE COLD SHRINKABLE JOINTS FOR 15KV TO 35KV

FOR 1/C SHIELDED POWER CABLES

Cold shrinkable joint with pre-expanded rejacketing sleeve. Quick and easy installation. Meets NMX-J-158- ANCE- and IEEE-404 requirements.

KEY FEATURES

• All-in-One design is quick and easy to install.
• Pre-expanded, single piece silicone rubber joint body with high mechanical expansion capability allows a wide application range.
• Ergonomically designed spiral holdout provides a smooth installation with low release forces.
• Total length of the splice body on the holdout is 14 to 19 inches providing a compact design

IN-LINE HEAT SHRINK SPLICE FOR 5KV TO 35KV

FOR 1/C SHIELDED CABLE

TE Connectivity’s (TE) Raychem heat-shrinkable shielded power cable splices are pre-engineered to offer a compact, low-profile installation with a minimum diameter buildup.

Qualified to IEEE 404 and NMX-J-158-ANCE-2002.

For use on copper tape, wire shield, lead sheath, and UniShield cables. Some kits contain tube for outer layer.

KEY FEATURES

• Kits contain a solderless grounding kit, consisting of a ground clamp, a ground braid, and shielding mesh.
• Heat-shrink feature allows the kits to accommodate out-of-round, out-of-spec cable.